Installation Done Right From Day One
A badly installed aircond will not last. We see it every week in Cheras: units that were fitted by a cheap subcontractor two or three years ago, leaking water down the wall, icing up because of low refrigerant, or tripping the breaker because the copper run was never vacuumed properly. Correct installation is the single biggest factor in whether your unit will last ten years or fail within two. As your trusted aircond service Cheras installer, we follow manufacturer specification on every job, for every brand.
Every quote we issue includes labour and a standard length of copper piping. No surprise per-foot charges after the van arrives. We carry out a free site inspection, BTU sizing for the actual room, and full vacuum-and-charge commissioning so your unit runs at factory efficiency from the first minute.
Why Condo and Landed Installs Are Two Different Jobs
The installation landscape across Cheras is unusually varied, and a generic approach produces headaches for the homeowner. We adapt the job to the property type.
High-rise condominiums around Taman Maluri, Bandar Sri Permaisuri and the wider MRT Kajang Line corridor come with tight service yards, restricted working hours, and strata rules that forbid altering the building facade. Outdoor compressors must sit in the designated yard bay, drain lines must run through pre-approved sleeves, and our crew must complete noisy work within the 9am to 5pm weekday window enforced by most Joint Management Bodies.
Older landed terrace and semi-D homes in Taman Midah, Taman Segar and Bandar Tun Razak come with a different challenge: legacy electrical wiring that was never designed to support modern inverter aircond. Before the new unit goes up, we often need to verify the MCB sizing and recommend a dedicated circuit so the inverter board does not fry during the first heatwave.
The Systems We Fit for KL Homes
Wall-Mounted Split Units
The most common residential install. We handle single-room jobs, multi-room replacements, and full landed-home fit-outs from 1.0HP up to 3.0HP. Typical installation time is two to three hours per indoor unit, and we size the BTU rating based on room dimensions, ceiling height, sun exposure and window treatment.
Ceiling Cassette Units
Four-way blow cassettes are the default for offices, meeting rooms and larger halls. We handle 2.0HP to 6.0HP cassettes with accurate false-ceiling cutouts, condensate pump wiring where gravity drainage is not possible, and fully concealed copper pipe runs.
Multi-Split Systems
One outdoor condenser serving two to five indoor heads. The practical choice when condo yard space is tight or when a landed home has limited outdoor space for multiple condensers. We plan the refrigerant route, calculate the combined load, and balance line lengths so every indoor unit cools equally.
Working With JMBs and High-Rise Management
Condo management across Cheras has tightened up significantly since the M Vertica and Arte Cheras handovers started flooding the area with new residents. Our installers arrive with the documents building security actually wants: worker list, contractor pass, proof of insurance, and a clean copy of our SSM and CIDB registrations. We submit the installation request through the JMB office before the job, coordinate lift bookings, and make sure the drill work happens only inside the permitted hours. Zero friction with building security means your install finishes on schedule.
Our Seven-Step Installation Workflow
- Free site inspection. Room measurement, electrical capacity check, and confirmation of indoor and outdoor unit positions.
- BTU sizing. Room-by-room calculation to match the correct HP rating to the real cooling load, not just floor area.
- Written quote. Fixed price in writing that covers labour, copper piping of standard length, drilling, and commissioning.
- Unit procurement. Collect the new unit from your supplier or deliver it ourselves for a single invoice.
- Installation day. Bracket mounting, wall drilling, copper piping, electrical termination, vacuum pump commissioning, and measured gas charge.
- Commissioning test. At least 15 minutes of cool-air testing and temperature logging.
- Handover. Remote walkthrough with the homeowner and a copy of the workmanship warranty certificate.
Transparent Pricing and Brand-Neutral Advice
Standard wall-split installation starts from RM350 for a 1.0HP unit (labour only, with the unit supplied by the customer). Full supply-and-install pricing depends on brand, HP rating and piping length.
- 1.0HP to 1.5HP wall split - from RM350 labour, or RM1,500 to RM2,200 supply and install
- 2.0HP to 2.5HP wall split - from RM450 labour, or RM2,200 to RM3,000 supply and install
- 2.0HP to 3.0HP ceiling cassette - from RM650 labour, or RM3,500 to RM5,500 supply and install
- Multi-split system - quoted per job once the configuration is confirmed
We are brand-neutral on recommendations and fit every major manufacturer sold in Malaysia: Daikin, Panasonic, Acson, Midea, York, LG, Samsung, Hitachi, Mitsubishi and Sharp. Our advice is based on your budget, room size and warranty preference, not on which brand pays us the highest margin. For a typical condo bedroom in Cheras, a 1.0HP or 1.5HP Daikin inverter remains the sweet spot. For open-plan living rooms inside larger terrace homes, a 2.5HP Panasonic often wins on price-to-efficiency.
WhatsApp for a Free Quote
Send us your room dimensions (length, width, ceiling height) and your preferred brand via WhatsApp 012-2252 623. We will recommend the correct HP rating and issue a fixed written quote within 24 hours. No pushy sales calls, no surprise charges on the day of the installation. We serve Cheras, Ampang, Kajang, Seri Kembangan and Balakong on same-week scheduling.